Xerox ii LINXSolid Inkjet 100 Service Manual page 237

5. Remove the right I/O board.
6. At the right side of the printer, use a small, flatblade
screwdriver to unlock the maintenance cam roller flag from the
end of the maintenance cam roller.
7. Inside the left-side printer frame, remove the C-clip securing
the maintenance cam roller in place. Remove the maintenance
cam roller.
Reverse these steps to install the maintenance cam roller and electric
clutch.
Maintenance
roller electric
clutch
Lock
Figure 6-30. Removing Maintenance Cam Roller and Electric Clutch
Bearing
Maintenance
cam roller flag
Removal and Replacement 6-47
C-clip
840-4-31