Specifying An Ip Address For Ipv4 (No Dhcp) - Ricoh Aficio SP 3500N Hardware Manual

4. Configuration
Setting Name
IPv6 Config.
1
* "X" indicates a unique address number for your printer.
• If [DHCP] is in use, the IP address, subnet mask, and gateway address are all set automatically.
• Each printer has a unique [MAC Address] value.
• Set the Ethernet speed if necessary.

Specifying an IP Address for IPv4 (No DHCP)

Use the following procedure to assign a specific IP address to the printer with IPv4 protocol. This
procedure is only necessary if you want to use the printer on a network without DHCP, or want to
prevent the printer's IP address from changing.
Before beginning this procedure, make sure you have the IP address, subnet mask, and gateway
address that the printer will use.
44
• IPv6: On
• DHCP: Off
• IP Ad. (DHCP): XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
1
XXXX *
If the DHCP setting is enabled, the IPv6 address obtained
from a DHCP server is displayed.
• Manual Address:
• Manual Address: 0000:0000:0000
• Prefix Length: (0-128) 0
• Gateway Address: 0000:0000:0000:
• Stateless Ad.:
• Address 1: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
1
XXXX *
• Address 2: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
1
XXXX *
• Address 3: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
1
XXXX *
• Address 4: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
1
XXXX *
• Link-local Ad.: XXXX: XXXX: XXXX: XXXX: XXXX *
Value
1