Table of Contents
Advertisement
3. Installing the Printer Driver
• The number after "USB" varies depending on the number of printers connected.
Windows Vista, Windows Server 2008 - USB
1.
Close all applications except this manual.
2.
Check that the power of the printer is off.
3.
Connect the printer to your computer with a USB cable.
Connect the USB cable firmly.
3
4.
Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
5.
In the [Found New Hardware] dialog box, click [Locate and install driver software
(recommended)].
If the [User Account Control] window appears, click [Yes] or [Continue].
6.
Insert the CD-ROM into the CD-ROM drive.
If Auto Run starts, click [Cancel] and then [Exit].
7.
Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• D:\DRIVERS\PCL6\XP_VISTA\MUI\disk1
The PCL6 printer driver will be installed in the language of the operating system.
8.
Check the printer driver location, and then click [Next].
9.
Click [Close].
If the installation is successful, the icon of the printer connected to the "USB001" port is added to the
[Printers], [Printers and Faxes], or [Devices and Printers] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
• The number after "USB" varies depending on the number of printers connected.
Windows 7, Windows Server 2008 R2 - USB
1.
Close all applications except this manual.
2.
Check that the power of the printer is off.
3.
Connect the printer to your computer with a USB cable.
Connect the USB cable firmly.
44
Advertisement
Table of Contents
