Table of Contents
Advertisement
4. Print
Windows Vista, Windows Server 2008
1.
Quit all applications. (Do not close this manual.)
2.
Check that the power of the machine is off.
3.
Connect the machine and computer using a USB cable.
Connect the USB cable firmly.
4.
Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
5.
In the [Found New Hardware] window, click [Locate and install driver software
(recommended)].
6.
Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Close].
7.
Select the name of the machine whose driver you want to install.
Check the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files are stored in the following locations:
32-bit driver D:\X86\DRIVERS\PS\XP_VISTA\MUI\DISK1
64-bit driver D:\X64\DRIVERS\PS\X64\MUI\DISK1
8.
Click [Next].
The installation starts.
9.
Click [Close].
If the printer driver has already been installed and plug and play is enabled, the icon of the printer
connected to the "USB001" port is added to the [Printers], [Printers and Faxes], or [Devices and
Printers] window.
The number after "USB" varies depending on the number of printers connected.
Windows 7, Windows Server 2008 R2
1.
Quit all applications. (Do not close this manual.)
2.
Check that the power of the machine is off.
3.
Connect the machine and computer using a USB cable.
Connect the USB cable firmly.
4.
Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
5.
Click [Devices and Printers] from the [Start] menu.
70
Hide quick links:
Advertisement
Table of Contents
