Pg Setting - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

2.4 PG Setting

As this printer uses an Auto PG (APG), an appropriate PG position is set according to the used paper type.
The following table indicates the PG positions, the main applications of each position, and the relationships between the two sensors used with the APG.
Application
PG (– –)
Printing • Photo paper (A4 or more) • Photo paper
Non-printing • Position for phase
alignment at reassembly
PG value 1.0mm
Sensor PG (– –)
APG Sensor 1* High
APG Sensor 2 Low
Note "*": The signal output is "Low" while the PG positions are changed.
Operating Principles
PG (–) PG (Typ)
• Plain paper
(Less than A4)
• Exclusive paper
• PG (-) rub avoidance
• PG adjustment position • Standby position after
power-on
1.2mm
PG (–) PG (Typ)
High
Low
Table 2-3.
PG Position
PG (+)
• Envelope
• PG (Typ) rub avoidance
–
1.7mm 2.1mm
PG (+)
High High
Low Low
PG Setting
PG (++)
–
• Initialization at power-on • Paper jam removal
• Cleaning (wiping)
• Ink Cartridge
replacement
4.5mm
PG (++)
High
High
Revision C
Release
–
–
Release
High
High
24
Confidential