Snmp View Table - D-Link xStack User Manual

xStack

SNMP View Table

This window is used to assign views to community strings that define which MIB objects can be accessed by a remote SNMP
manager.
To view this window, click Administration > SNMP Manager > SNMP View Table, as shown below:
To delete an existing SNMP View Table entry, click the corresponding
click the Add button which will reveal a new window.
The SNMP View created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous window.
The following parameters can set:
Parameter
View Name
Subtree OID
View Type
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 - 77 SNMP View Table window
Figure 2 - 78 SNMP View Table Configuration window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB
tree) that will be included or excluded from access by an SNMP manager.
Select Included to ensure this object is included in the list of objects that an SNMP manager
can access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
button in the Delete column. To create a new entry,
73