D-Link xStack User Manual page 101

xStack
Multicast IP
Address List
Source IP Address
The following table is used to set the Destination settings, to view this window click the corresponding View button in the IP
Multicast VLAN Replication Entries table as shown below:
This table is used to configure the destination, so when traffic matches an IP Multicast VLAN Replication entry, it will be
replicated based on the destination settings. Multiple destination entries can be defined and each destination entry specifies the
VLAN and the outgoing port on which the traffic will be replicated. The outgoing port must be a member port of the VLAN,
whether the egress packet is tagged or untagged based on the VLAN settings.
Figure 2 - 100 IP Multicast VLAN Replication Destination Edit window
The following fields may be set:
Parameter
Entry Name
VID / VLAN Name
Port List(e.g..:1,6-9)
Action
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
A multicast IP address list can be entered.
A source IP Address can be specified.
Description
The name of the previously created IP Multicast VLAN Replication entry will be displayed.
Select VID and enter an outgoing VLAN ID. Select VLAN Name and enter an outgoing VLAN
Name.
Enter the outgoing list of ports to be included in the destination settings.
Use the drop-down menu to Add or Delete the destination.
90