D-Link xStack User Manual page 259

xStack
The following parameters can be configured:
Parameter
Unit
From/To
State
Aging Time (1-1440
min)
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 29 WAC Port Settings window
Description
Use the drop-down menu to select the unit you wish to configure.
Enter the range of ports you wish to configure.
Enable or Disable the WAC port settings on the specified ports.
This parameter specifies the period of time a host will keep in authenticated state after it
succeeds to authenticate. Enter a value between 0 and 1440 minutes. The default setting
is 1440 minutes. To maintain a constant Port Configuration tick the Infinite box in the WAC
configuration window.
248