D-Link xStack User Manual page 202

Layer 2+ gigabit ethernet managed switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

xStack
To remove a previously created rule, select it and click the
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter
Description
Profile ID
This is the identifier number for this profile set.
Mode
Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that match the access profile are not forwarded by the Switch
and will be filtered.
Select Mirror to specify that packets match the access profile are mirrored to a port defined in the
Port Mirroring window. Port Mirroring must be enabled and a target port must be set.
Access ID
Type in a unique identifier number for this access. This value can be set from 1 to 128.
Auto Assign – Checking this field will instruct the Switch to automatically assign an Access ID for
the rule being created.
Type
Specifies the type of profile that is being created.
Priority (0-7)
This parameter is to be specified to re-write the 802.1p default priority previously set in the
Switch, which is used to determine the CoS queue to which packets are forwarded to. Once this
field is specified, packets accepted by the Switch that match this priority are forwarded to the
CoS queue specified previously by the user.
replace priority − Click the corresponding box if you want to re-write the 802.1p default priority of
a packet to the value entered in the Priority field, which meets the criteria specified previously in
this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have
its incoming 802.1p user priority re-written to its original value before being forwarded by the
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 12 Access Rule Configuration window (Ethernet)
button. To add a new Access Rule, click the Add Rule button:
191

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3400 series

Table of Contents