xStack
802.1X User
This window allows the user to set different local users on the Switch and set a global limitation on the maximum number of users
that can be learned via 802.1X authentication.
To view this window, click Security > 802.1X > 802.1X User, as shown below:
This screen allows setting of the following features:
Parameter
Max User (1-4000)
User Name
Password
Confirm Password
Click Apply to implement changes made. The new User will be displayed in the 802.1X User Table. To remove a user click the
corresponding delete button.
Initialize Port(s)
Existing 802.1X port and MAC settings are displayed and can be configured using the window below.
To view this window, click Security > 802.1X > Initialize Port(s), as shown below:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 22 802.1X User window
Description
Enter the maximum number of users to be allowed. Check the No Limit check box to specify
that there will be the maximum number of users. By default there is no limit.
Enter the User Name of the new profile to be created.
Enter a password for the new user.
Re-enter the password entered in the field above.
240