D-Link xStack User Manual page 321

xStack
State The Authenticator State value can be: Authenticated, Authenticating, or blocked.
VLAN ID Displays the assigned VLAN ID. If a port/host is authenticated and the authorization Network
is enabled, the assigned VLAN is determined by the VLAN assigned from RADIUS server. If
there is no target VLAN information or invalid VLAN information embedded in RADIUS
message it will be ignored.
Displays the assigned priority. If a port is authenticated and the authorization is enabled, the
Assigned Priority
802.1p default priority can be controlled by the RADIUS server via the passing value. The
value of 802.1p comes from when the RADIUS server overwrites the locally configured ports.
If the assigned priority is not valid (less than 0 or greater than 7) it will be ignored. In this
case, the switch still adopts the local setting. The default priority is used to classify the
priority for untagged packets. The 802.1p priority is on per port basis.
However, for host-based authentication mode, the assigned 802.1p will be assigned for each
host (MAC).
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
310