Firmware Upgrade; Configuration Backup/Restore - D-Link xStack User Manual

®
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Help
•
About - Will display the SIM information, including the current SIM version.
Figure 2 - 115 About window

Firmware Upgrade

This window is used to upgrade firmware from the Commander Switch to the Member Switch. Member Switches will be listed in
the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and Version. To
specify a certain Switch for firmware download, click its corresponding check box under the Port heading. To update the firmware,
enter the Server IP Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate
the file transfer.
Figure 2 - 116 Firmware Upgrade window

Configuration Backup/Restore

This window is used to upgrade configuration files from the Commander Switch to the Member Switch. Member Switches will
be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and
Version. To specify a certain Switch for upgrading configuration files, click its corresponding radio button under the Port heading.
To update the configuration file, enter the Server IP Address where the firmware resides and enter the Path/Filename of the
firmware. Click Download to initiate the file transfer.
Figure 2 - 117 Configuration File Backup/Restore window
102