D-Link xStack User Manual page 353

xStack
PowerStatusChg
PowerFailure
PowerRecover
agentGratuitousARPTrap
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
generates a topology change notification.
Power Status change notification. The
notification is issued when the
swPowerStatus changes in the following
cases:
lowVoltage -> overCurrent.
owVoltage -> working.
lowVoltage -> disconnect.
lowVoltage -> connect.
overCurrent -> lowVoltage.
overCurrent -> working.
overCurrent -> disconnect.
overCurrent -> connect.
working -> lowVoltage.
working -> overCurrent.
working -> connect.
working -> disconnect.
fail -> connect.
fail -> disconnect.
connect -> lowVoltage.
connect -> overCurrent.
connect -> working.
connect -> disconnect.
disconnect -> lowVoltage.
disconnect -> overCurrent.
disconnect -> working.
disconnect -> connect.
Power Failure notification. The notification
is issued when the swPowerStatus
changes in the following cases:
lowVoltage -> fail.
overCurrent -> fail.
working -> fail.
connect -> fail.
disconnect -> fail.
Power Recover notification. The notification
is issued when the swPowerStatus
changes in the following cases:
fail -> lowVoltage.
fail -> overCurrent.
fail -> working.
This trap is sent when there is an IP
address conflict.
342
1.3.6.1.4.1.171.12.11.2.2.2.0.1
1.3.6.1.4.1.171.12.11.2.2.2.0.2
1.3.6.1.4.1.171.12.11.2.2.2.0.3
1.3.6.1.4.1.171.12.1.7.2.0.5