D-Link xStack User Manual page 44

xStack
Configure the parameters listed below:
Parameter
Index(1-4)
Server IP
Severity
Facility
UDP Port (514 or
6000-65535)
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 - 27 Configure System Log Server – Edit window
Description
Syslog server settings index (1-4).
The IPv4 address of the Syslog server.
This drop-down menu allows you to select the level of messages that will be sent. The
options are Warning, Informational, and All.
Some of the operating system daemons and processes have been assigned Facility values.
Processes and daemons that have not been explicitly assigned a Facility may use any of the
"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
designated are shown in the following: Bold font means the facility values that the Switch
currently now.
Numerical Facility
Code
0
1
2
3
4
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Type the UDP port number used for sending Syslog messages. The default is 514.
kernel messages
user-level messages
mail system
system daemons
security/authorization messages
messages generated internally by syslog line printer subsystem
network news subsystem
UUCP subsystem
clock daemon
security/authorization messages
FTP daemon
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)
33