Wac User Account - D-Link xStack User Manual

xStack
Idle Time (1-1440 min)
Block Time (0-300
sec)
Click Apply to implement changes made.

WAC User Account

This window is used to enable and configure Web-based Access Control User Account Settings on the Switch.
To view this window, click Security > Web Authentication > WAC User Account, as shown below:
To create a new user account click Add, the following window will be displayed for the user to configure. To edit an entry click
on the corresponding Modify button as shown below:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
This parameter specifies the period of time a host will keep in a blocked state after it fails
to authenticate. Enter a value between 0 and 300 seconds. The default setting is 0
seconds.
Figure 6 - 30 WAC User Account window
Figure 6 - 31 User Account Create window
249