Poe Port Settings - D-Link xStack User Manual

xStack

PoE Port Settings

This window is used to configure the PoE port settings on the Switch.
To view this window, click Administration > PoE > PoE Port Settings:
The following parameters can be configured:
Parameter
Unit
From Port/To Port
State
Priority
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 - 88 PoE Port Settings window
Description
Choose the switch in the switch stack for which to configure the PoE settings.
Users should note that not all switches in the xStack
when they are configured in a stack, the Primary Master switch will display the PoE settings to
be configured for the stack, whether or not the Switch is a PoE supported device. However,
only PoE supported switches have the PoE capability in the switch stack.
Select a range of ports from the pull-down menus to be enabled or disabled for PoE.
Use the pull-down menu to enable or disable ports for PoE.
Use the pull-down menu to select the priority of the PoE ports. Port priority determines the
®
DGS-3400 series support PoE yet,
80