D-Link xStack User Manual page 287
Layer 2+ gigabit ethernet managed switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- Hardware installation manual (71 pages) ,
- Software manual (160 pages)
Table of Contents
Advertisement
xStack
3DES-CBC
Blow-fish CBC
AES128-CBC
AES192-CBC
AES256-CBC
ARC4
Cast128-CBC
Twofish128
Twofish192
Twofish256
HMAC-SHA1
HMAC-MD5
HMAC-RSA
HMAC-DSA
Click Apply to implement changes made.
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
with a SSH program previously installed. This field is Enabled by default.
Encryption Algorithm
Use the pull-down to enable or disable the Triple Data Encryption Standard encryption
algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Blowfish encryption algorithm with Cipher
Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES-256
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Arcfour encryption algorithm with Cipher Block
Chaining. The default is Enabled.
Use the pull-down to enable or disable the Cast128 encryption algorithm with Cipher
Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the twofish128 encryption algorithm. The default
is Enabled.
Use the pull-down to enable or disable the twofish192 encryption algorithm. The default
is Enabled.
Use the pull-down to enable or disable the twofish256 encryption algorithm. The default
is Enabled.
Data Integrity Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Secure Hash algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the MD5 Message Digest encryption algorithm. The default is
Enabled.
Public Key Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the RSA encryption algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Digital Signature Algorithm (DSA) encryption. The default
is Enabled.
276
Advertisement
Table of Contents
