Traffic Segmentation - D-Link xStack User Manual

xStack
Switch, and will stop receiving all unnecessary broadcast IP packets, until the storm has
subsided.
The default setting is Fuzzy mode.
Safeguard Displays the current mode of the CPU Utilization Settings.
Engine Current
Status

Traffic Segmentation

Traffic segmentation is used to limit traffic flow from a single port to a group of ports. This method of segmenting the flow of
traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing traffic that does not
increase the overhead of the Master switch CPU.
To view this window, click Security > Traffic Segmentation, as shown below:
Click on the Setup button to open the Setup Forwarding Ports window, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 57 Current Traffic Segmentation Table window
270