Snmp View Table - D-Link DGS-3427 User Manual

xStack DGS-3400 Series Fast Ethernet Switch
To return to the SNMP User Table, click the Show All SNMP User Table Entries link. To add a new entry to the SNMP
User Table Configuration window, click on the Add button on the SNMP User Table window. This will open the
SNMP User Table Configuration window, as shown below.
Figure 6- 34. SNMP User Table Configuration window
To implement changes made, click Apply. To return to the SNMP User Table, click the Show All SNMP User Table
Entries link.

SNMP View Table

The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a
remote SNMP manager. To view the SNMP View Table window, open the SNMP Manager folder under
Administration and click the SNMP View Table entry. The following window should appear:
Figure 6- 35. SNMP View Table window
To delete an existing SNMP View Table entry, click the X in the Delete column corresponding to the entry you wish to
delete. To create a new entry, click the Add button and a separate window will appear.
59