Authentication Guest Vlan Settings - D-Link xStack User Manual

Layer 2+ gigabit ethernet managed switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

xStack
Methods
Click Apply to implement changes made.

Authentication Guest VLAN Settings

This window is used to display and configure the Authentication Guest VLAN settings on the Switch.
To view this window, click Security > Compound Authentication > Authentication Guest VLAN Settings, as shown below:
To configure a new entry click the Add button, to reveal the following window:
The following parameters may be set:
Parameter
VID / VLAN Name
Port List(e.g.:1,6-9)
Action
Click Apply to implement changes made.
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
same port will be granted access to the network. If the user fails the authorization, this port will
keep trying until the next authentication.
Host Based – Each user can be authenticated individually.
None – Specifies that compound authentication is not enabled.
Any – Specifies that a client will gain access if it passes any of the authentication methods
(802.1X, MAC, or JWAC).
802.1X+IMPB – Specifies that 802.1X+IMPB can be enabled on a port at the same time.
802.1X will be verified first, and then IMPB will be verified. Both authentication methods need
to be passed. If either authentication method fails, the client will be denied access.
IMPB+JWAC – Specifies that JWAC and IMPB can be enabled on a port at the same time.
JWAC will be verified first, and then IMPB will be verified. Both authentication methods need to
be passed. If either authentication method fails, the client will be denied access.
Figure 6 - 67 Authentication Guest VLAN Settings window
Figure 6 - 68 Authentication Guest VLAN – Add window
Description
Select either VID or VLAN Name and enter the appropriate information about a previously
configured VLAN.
Enter the port or list of ports you wish to configure. Check the Select All Ports check box to
select all ports.
Select the action you wish to apply to the Guest VLAN.
Select Add to add a port to the Guest VLAN portlist or Delete to remove ports from the Guest
VLAN portlist.
280

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3400 series

Table of Contents