D-Link xStack User Manual page 144

xStack
The following windows will allow users to create and configure multicast VLANs for the switch.
To view this windows, click L2 Features > IGMP Snooping > ISM VLAN Settings, as shown below.
The previous window displays the settings for previously created Multicast VLANs. To view the settings for a previously created
multicast VLAN, click the Modify button of the corresponding ISM VLAN you wish to modify. To create a new Multicast VLAN,
click the Add button in the top left-hand corner of the screen, which will produce the following window to be configured.
Figure 3 - 33 IGMP Snooping Multicast VLAN Settings window (Add)
Enter a name for the ISM VLAN into the VLAN Name field and choose a VID between 2 and 4094. Entries in these two fields
must not have been previously configured on the switch or an error message will be prompted to the user. Once these two fields
have been filled, click the Apply button, which will automatically adjust the current window to resemble the following window.
Figure 3 - 34 IGMP Snooping Multicast VLAN Settings window (Modify)
Both the Add and Modify IGMP Snooping Multicast VLAN Settings windows have the following configurable fields:
Parameter Description
VLAN Name Enter the name of the new Multicast VLAN to be created. This name can be up to 32 characters
in length. This field will display the pre-created name of a Multicast VLAN in the Modify window.
VID Add or edit the corresponding VLAN ID of the Multicast VLAN. Users may enter a value between
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 3 - 32 IGMP Snooping Multicast VLAN Table window
133