Basic Lldp Port Settings - D-Link xStack User Manual

xStack
Notification
LLDP Notification Interval is used to send notifications to configured SNMP trap receiver(s) when
Interval (5-3600)
an LLDP change is detected in an advertisement received on the port from an LLDP neighbor.
To set the LLDP Notification Interval, enter a value in seconds (5 to 3600).
Click Apply to implement changes made.

Basic LLDP Port Settings

This window is used to display the LLDP port settings on the Switch. The ports can be individually configured to send
notifications to configured SNMP trap receivers.
To view this window, click L2 Features > LLDP > Basic LLDP Port Settings, as shown below:
The following parameters can be set:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 3 - 59 Basic LLDP Port Settings window
157