Dhcp Server Screening Port Settings - D-Link xStack User Manual

xStack

DHCP Server Screening Port Settings

This window is used to enable the settings for the Filter DHCP Server Port Settings.
To view this window, click Administration > Filter DHCP Server > Filter DHCP Server Port Settings, as shown below:
Figure 2 - 68 DHCP Server Screening Port State Settings window
The following parameters may be configured.
Parameter Description
State Used to Enable or Disable the Filter DHCP Server Port State Settings.
PortList Specifies the ports that will enable or disable the filter DHCP server.
Action Select Add or Delete to add or delete a filter DHCP server entry.
Server IP The IP address of the DHCP server that specifies an allotted server ipaddress to the client.
Address
Client MAC Specifies the MAC address of the client which allowed the requested IP address from the DHCP
Address server.
PortList Enter the list of ports to use the given filter DHCP server entry.
Click Apply to implement the changes
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Filter DHCP Server Port Settings
64