D-Link xStack User Manual page 255

xStack
Parameter
Succession
RADIUS Server
Authentic Port
Accounting Port
Key
Confirm Key
Timeout(1-255)
Retransmit(1-20)
Status
Click Apply to implement changes made.
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Description
Choose the desired RADIUS server to configure: First, Second or Third.
Set the RADIUS server IP.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Set the RADIUS account server(s) UDP port. The default port is 1813.
Set the key the same as that of the RADIUS server.
Confirm the shared key is the same as that of the RADIUS server.
Enter the timeout value in seconds (1 to 255). The default value is 5.
Set the count for retransmit(1 to 20).The default value is 2.
This allows the user to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
244