802.1X User; Authentication Radius Server - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

802.1X User

To create a new 802.1X User enter a user name and password then reconfirm the password and click Apply, the new
user will be displayed in the lower half of the table. To delete an entry click the corresponding Delete button.
To configure the 802.1X User, click Security > 802.1X > 802.1X User

Authentication RADIUS Server

The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To configure the 802.1X User, click Security > 802.1X > Authentication RADIUS Server
This window displays the following information:
Parameter
Index
IP Address
Authentic Port
(1-65535)
Accounting Port
(1-65535)
Timeout (1-255)
Retransmit (1-255)
Key
(Max. length 32 bytes)
Figure 9- 23. 802.1X User window
Figure 9- 24. Authentic RADIUS Server window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3.
Set the RADIUS Server IP.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Set the RADIUS account server(s) UDP port. The default port is 1813.
Enter the timeout value in seconds (1 to 255) the default value is 5.
Set the retransmit value in seconds (1 to 255) the default value is 2.
Set the key the same as that of the RADIUS server. Maximum length of the entry is 32
bytes.
143