Create 802.1X User; Show 802.1X User - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Settings
-------------------------------------------------------------------
Guest VLAN
Enabled Guest VLAN Ports
DGS-1210-28MP/ME:5#

create 802.1x user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a 802.1x user:
DGS-1210-28MP/ME:5# create 802.1x user dlink
Command: create 802.1x user dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-1210-28MP/ME:5#

show 802.1x user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the 802.1x user information:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
: default
: 1,2,3,4,5,6
Enable network access to a 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command enables network access to a
802.1x user.
<vlan_name 15> − The name of the 802.1x user to be created.
Only Administrator, operator or power user-level users can issue this
command.
Displays the user information for the Guest VLAN.
show 802.1x user
The show 802.1x user command displays the 802.1x user
information on the Switch.
None.
Only Administrator, operator or power user-level users can issue this
command.
380