Show 802.1X Guest_Vlan; Create 802.1X User - D-Link DGS-1100-06/ME Cli Reference Manual

Parameters
Restrictions
Example usage:
To configure ports to the Guest VLAN:
DGS-1100-06/ME:5#config 802.1x guest_vlan ports 1-3 state enable
Command: config 802.1x guest_vlan ports 1-3 state enable
Success.
DGS-1100-06/ME:5#

show 802.1x guest_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Guest VLAN configuration information:
DGS-1100-06/ME:5#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Settings
------------------------------------------------------------------------
Guest VLAN
Enabled Guest VLAN Ports
DGS-1100-06/ME:5#

create 802.1x user

Purpose
Syntax
Description
Parameters
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
VLAN is enabled, the member port receives limited network access.
For example, a network administrator can use the 802.1x Guest
VLAN to deny internal network access via port–based
authentication, but grant Internet access to unauthorized users.
<portlist> – A port or range of ports to be configured to the Guest
VLAN.
All – Indicates all ports to be configured to the guest vlan.
state [enable | disable] – Specifies the guest vlan port is enabled or
disabled of the switch.
Only Administrator or operator–level users can issue this command.
Displays configuration information for the Guest VLAN.
show 802.1x guest_vlan
The show 802.1x guest_vlan command displays the Guest VLAN
name, state, and member ports.
None.
None.
Enable network access to a 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command enables network access to a
802.1x user.
<vlan_name 15> − The name of the 802.1x user to be created.
: default
: 1,2,3,4,5,6
184