Ip Multicasting Commands - D-Link xStack DGS-3300 User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
The IP multicasting commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
show ipmc cache
show ipmc
Each command is listed, in detail, in the following sections.
show ipmc cache
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current IP multicast forwarding cache:
DGS-3324SRi:4#show ipmc cache
Command: show ipmc cache
Multicast
Group
------------------
224.1.1.1
224.1.1.1
224.1.2.3
Total Entries: 3
DGS-3324SRi:4#
Parameters
{group <group>} {ipaddress <network_address>}
{ipif <ipif_name 12> | protocol [inactive | dvmrp | pim]}
Used to display the current IP multicast forwarding cache.
show ipmc cache {group <group>} {ipaddress
<network_address>}
This command will display the current IP multicast forwarding
cache.
group <group> − The multicast group IP address.
ipaddress <network_address> − The IP address and netmask of
the source. The address and mask information can be specified
using the traditional format (for example, 10.1.2.3/255.0.0.0 or in
CIDR format, 10.1.2.3/8).
None.
Source Address/Netmask Upstream
----------------
10.48.74.121/32
20.48.74.25 /32
10.48.75.3 /3
IP M
ULTICASTING
Expire
Neighbor Time
--------------- ----------
10.48.75.63 30
20.48.75.25 20
10.48.76.6 30
324
39
C
OMMANDS
Routing
Protocol
---------
dvmrp
dvmrp
dvmrp