Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
download prom_fromTFTP
Restrictions
Example usage:
To download a PROM code file:
DGS-3324SRi:4#download prom_fromTFTP 10.48.74.121 c:\pXprom_2.01-B01d1.had
DGS-3324SRi:4# download prom_fromTFTP 10.48.74.121 c:\pXprom_2.01-B01d1.had
Warning!
Do not power off device before PROM upgrade process has completed!
Powering off the device during PROM upgrade may cause boot up device failure.
Upon upgrade completion, the device will reboot.
Are you sure you want to proceed with the PROM upgrade? (y/n) y
Connecting to server...........................Done.
Download prom code......................... Done.
Do not power off!
Please wait, programming flash..........Done.
Saving current settings to NV-RAM.....Done.
Please wait, the switch is rebooting...
upload
Purpose
Syntax
Description
be on the same IP subnet as the Switch.
<path_filename 64> − The DOS path and filename of the PROM code
on the TFTP server or CompactFlash card. For example,
C:\3226SPROM.had.
Only administrator-level users can issue this command.
Used to upload the current switch settings or the switch history log
to a TFTP server or a CompactFlash memory card.
upload [cfg_toTFTP <ipaddr> <path_filename 64> |
log_toTFTP <ipaddr> <path_filename 64> | [firmware_toCF
<path_filename 64> image_id <int 1-2> | cfg_toCF
<path_filename 64> | log_toCF <path_filename 64>]
This command is used to upload either the Switch's current
settings, the Switch's history log or firmware to a TFTP server or a
CompactFlash memory card.
55
Advertisement
Table of Contents
