D-Link xStack DGS-3300 User Manual page 204

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#config 802.1x capability ports 1:1 – 1:10 authenticator
Command: config 802.1x capability ports 1:1 – 1:10 authenticator
Success.
DGS-3324SRi:4#
config 802.1x auth_parameter
Purpose
Syntax
Description
Used to configure the 802.1x Authentication parameters on a
range of ports. The default parameter will return all ports in the
specified range to their default 802.1x settings.
config 802.1x auth_parameter ports [<portlist> | all]
[default | {direction [both | in] | port_control [force_unauth |
auto | force_auth] | quiet_period <sec 0-65535>| tx_period
<sec 1-65535> | supp_timeout <sec 1-65535> |
server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | enable_reauth [enable |
disable]}]
The config 802.1x auth_parameter command is used to
configure the 802.1x Authentication parameters on a range of
ports. The default parameter will return all ports in the specified
range to their default 802.1x settings.
201