D-Link xStack DGS-3300 User Manual page 17

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4# show config config_in_NVRAM
Command: show config config_in_NVRAM
#------------------------------------------------------------------------------------------------------
#
#
#
#
#------------------------------------------------------------------------------------------------------
# BASIC
config serial_port baud_rate 115200 auto_logout never
enable telnet 23
enable web 80
enable clipaging
# STORM
config traffic control 1:1-1:26 broadcast disable multicast disable dlf disable
threshold 128
config traffic control 2:1-2:24 broadcast disable multicast disable dlf disable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show session
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the way that the users logged in:
DGS-3324SRi:4#show session
Command: show session
ID
--
*8
Total Entries: 1
DGS-3324SRi Configuration
Firmware: Build 4.20-B08
Copyright(C) 2004-2007 D-Link Corporation. All rights reserved.
Used to display a list of currently logged-in users.
show session
This command displays a list of all the users that are logged-in at
the time the command is issued.
None.
None.
Live Time From
--------- --------------
03:36:27 Serial Port
Level Name
----- ---------------
4 Anonymous
14