Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
delete ospf virtual_link
Parameters
Restrictions
Usage Example:
To delete an OSPF virtual interface from the Switch:
show ospf virtual_link
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current OSPF virtual interface configuration:
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id> − The OSPF router ID for the remote area. This is
a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx)
that uniquely identifies the remote area's Area Border Router.
The router ID of the neighbor router.
Only administrator-level users can issue this command.
DGS-3324SRi:4#delete ospf virtual_link 10.1.12 20.1.1.1
Command: delete ospf virtual_link 10.1.12 20.1.1.1
Success.
DGS-3324SRi:4#
Used to display the current OSPF virtual interface configuration.
show ospf virtual_link {<area_id> <neighbor_id>}
This command will display the current OSPF virtual interface
configuration.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id> − The OSPF router ID for the remote area. This is a
32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the remote area's Area Border Router. This is
the router ID of the neighbor router.
None.
348
Advertisement
Table of Contents
