xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Allowed Metric Type combinations are mettype 1 or mettype 2. The metric value 0 above will be redistributed in OSPF as the
metric 20.
Example Usage:
To add route redistribution settings:
create route redistribute dst rip src
Purpose
Syntax
Description
Route Source
RIP
Static
Local
DGS-3324SRi:4#create route redistribute dst ospf src rip
Command: create route redistribute dst ospf src rip
Success.
DGS-3324SRi:4#
Used to add route redistribution settings for the exchange of OSPF
routes to RIP routes on the Switch.
create route redistribute dst rip src {all | internal | external |
type_1 | type_2 | inter+e1 | inter+e2}] {metric <value>}
This command will redistribute routing information between the
OSPF and RIP routing protocols to all routers on the network that
are running OSPF or RIP. Routing information entered into the
Static Routing Table on the local switch is also redistributed
Metric
0 to 16777214
0 to 16777214
0 to 16777214
283
Metric Type
mettype 1
mettype 2
mettype 1
mettype 2
mettype 1
mettype 2