D-Link xStack DGS-3300 User Manual page 249

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Usage Example:
To configure box type:
DGS-3324SRi:4#config box_type current_box_id 3 type BOX_NOTEXIST
Command: config box_type current_box_id 3 type BOX_NOTEXIST
Success.
DGS-3324SRi:4#
config all_boxes_id
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To configure box type:
DGS-3324SRi:4#config all_boxes_id auto_mode
Command: config all_boxes_id auto_mode
Success.
DGS-3324SRi:4#
show stack_information
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display stack information:
Used to configure box IDs for switches in a stack.
config all_boxes _id [static_mode | auto_mode]
This command will determine the mode of assigning box IDs.
static_mode – Box IDs are assigned by the user.
auto_mode – Box IDs are assigned automatically.
Only administrator-level users can issue this command.
Used to display the stack information table.
show stack_information
This command display stack information.
None.
None.
246