D-Link xStack DGS-3300 User Manual page 215

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#show auth_session_statistics ports 1:16
Command: show auth_session_statistics ports 1:16
Port number : 1:16
SessionOctetsRx
SessionOctetsTx
SessionFramesRx
SessionFramesTx
SessionId
SessionAuthenticMethod
SessionTime
SessionTerminateCause
SessionUserName
CTRL+C ESC q
show auth_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication statistics for port 16 of module 1:
0
0
0
0
Remote Authentication Server
0
SupplicantLogoff
Trinity
Quit SPACE n Next Page
Used to display the current authentication statistics.
show auth_statistics {ports <portlist> | all]}
The show auth_statistics command is used to display the current
authentication statistics of the Switch on a per port basis.
ports <portlist> − Specifies a range of ports. The port list is specified by
listing the lowest switch number and the beginning port number on that
switch, separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated by
a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch
1, port 3 and switch 2, port 4 − in numerical order.
all – Specifies that all ports will be viewed.
None.
Enter Next Entry
212
a All