D-Link xStack DGS-3300 User Manual page 322

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4# show pim cbsr
Command: show pim cbsr
PIM Candidate-BSR Table
C-BSR Hash Mask Len
C-BSR Bootstrap Period
Interface
---------------------
Trinity
System
DGS-3324SRi:4#
show pim
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To view the PIM settings:
DGS-3324SRi:4# show pim
Command: show pim
PIM Global State
Last Hop SPT Threshold
RP SPT threshold
Register Probe Time
Register Suppression Time
PIM Interface Table
Interface
------------------
Trinity
System
Total Entries: 2
DGS-3324SRi:4#
: 30
: 2
IP Address
---------------------
11.1.1.1/8
10.53.13.30/8
Used to display the PIM settings, along with PIM parameters
configured for the Switch.
show pim {ipif <ipif_name12>}
This command will display the settings for the PIM function that are
accessible to the switch.
<ipif_name 12> - Enter the name of the IP address for which to
display settings. Entering no name will display all PIM IP interfaces.
None.
: Enabled
: 0 packet per second (switch to SPT tree immediately)
: 0 packet per second (switch to SPT tree immediately)
: 5
: 60
Designated
IP Address Router
--------------------- -----------------
11.1.1.1/8 10.53.13.30
10.53.13.30/8 11.1.1.1
Priority
------------
4
-1 (disabled)
Hello J/P
Interval Interval Mode State
----------- ----------- -------
30 60
60 60
319
---------
DM Disabled
SM Enabled