xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#disable syslog
Command: disable syslog
Success.
DGS-3324SRi:4#
show syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current status of the syslog function:
DGS-3324SRi:4#show syslog
Command: show syslog
Syslog Global State: Enabled
DGS-3324SRi:4#
create syslog host
Purpose
Syntax
Description
Used to display the syslog protocol status as enabled or disabled.
show syslog
The show syslog command displays the syslog status as
enabled or disabled.
None.
None.
Used to create a new syslog host.
create syslog host [<index 1-4>] {severity [informational |
warning | all] | facility [local0 | local1 | local2 | local3 | local4 |
local5 | local6 | local7] | udp_port <udp_port_number> |
ipaddress <ipaddr> | state [enable | disable]
The create syslog host command is used to create a new syslog
host.
66