D-Link xStack DGS-3300 User Manual page 306

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
To disable DVMRP:
show dvmrp routing_table
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display DVMRP routing table:
DGS-3324SRi:4#show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address/Netmask Upstream Neighbor Metric Learned
---------------
10.0.0.0/8
20.0.0.0/8
30.0.0.0/8
Total Entries: 3
DGS-3324SRi:4#
show dvmrp neighbor
Purpose
Syntax
Description
DGS-3324SRi:4#disable dvmrp
Command: disable dvmrp
Success.
DGS-3324SRi:4#
Used to display the current DVMRP routing table.
show dvmrp routing table [ipaddress <network_address>]
The command is used to display the current DVMRP routing
table.
ipaddress <network_address> − The IP address and netmask
of the destination. The address and mask information can be
specified using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
---------------
10.90.90.90
20.1.1.1
30.1.1.1
Used to display the DVMRP neighbor table.
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress
<network_address>}
This command will display the current DVMRP neighbor table.
---- -------
2 Local
2 Local
2 Dynamic
303
Interface Expire
------------ ------
System -
ip2 117
ip3 106