D-Link xStack DGS-3300 User Manual page 325

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4# create pim register_checksum_include_data rp_ address 11.1.1.1
Command: create pim register_checksum_include_data rp_ address 11.1.1.1
Success.
DGS-3324SRi:4#
delete pim register_checksum_include_data
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To delete RPs that the Switch will send Register packets to and create checksums to be included with the data in
Registered packets:
DGS-3324SRi:4#delete pim register_checksum_include_data rp_ address 11.1.1.1
Command: delete pim register_checksum_include_data rp_ address 11.1.1.1
Success.
DGS-3324SRi:4#
show pim register_checksum_include_data_rp_list
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To show the RPs that the Switch will send Register packets to and create checksums to be included with the data in
Registered packets:
Used to disable the RPs that the Switch will send Register packets
to and create checksums to be included with the data in Registered
packets.
delete pim register_checksum_include_data rp_ address
<ipaddr>
This command will disable the RPs that the Switch will send
Register packets to and create checksums to be included with the
data in Registered packets. This command is for PIM-SM
configurations only.
rp_address <ipaddr> - Enter the IP address of the RP that will
discontinue sending Register packets to and create checksums to
be included with the data in Registered packets.
Only administrator-level users can use this command.
Used to display RPs that the Switch will send Register packets to
and create checksums to be included with the data in Registered
packets.
show pim register_checksum_include_data_rp_list
This command will display RPs that the Switch will send Register
packets to and create checksums to be included with the data in
Registered packets. This command is for PIM-SM configurations
only.
None.
Only administrator-level users can use this command.
322