Igmp Snooping Commands - D-Link xStack DGS-3300 User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
config igmp_snooping
config igmp_snooping
querier
enable igmp_snooping
disable igmp_snooping
config router_ports
config
router_ports_forbidden
show router_ports
show igmp_snooping
show igmp_snooping
group
show igmp_snooping
forwarding
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Syntax
Description
Parameters
Parameters
[<vlan_name 32> | all] {host_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable] | fast_leave [enable |
disable]}
[<vlan_name 32> | all] {query_interval <sec 1-65535> |
max_response_time <sec 1-25> | robustness_variable <value 1-
255> | last_member_query_interval <sec 1-25> | state [enable |
disable]}
{forward_mcrouter_only}
{forward_mcrouter_only}
<vlan_name 32> [add | delete] <portlist>
<vlan_name 32> [add | delete] <portlist>
{<vlan_name 32>} {static | dynamic | forbidden}
{vlan<vlan_name 32>}
{vlan <vlan_name 32>}
{vlan <vlan_name 32>}
Used to configure IGMP snooping on the Switch.
config igmp_snooping [<vlan_name 32> | all] {host_timeout <sec 1-
16711450> | router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable] fast_leave [enable | disable]}
This command allows the user to configure IGMP snooping on the Switch.
<vlan_name 32> − The name of the VLAN for which IGMP snooping is to
be configured.
all – Selecting this parameter will configure IGMP snooping for all VLANs
on the Switch.
IGMP S
NOOPING
141
19
C
OMMANDS