xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "D G S - 3 3 2 4 S R i S t a c k a b l e S w i t c h":
DGS-3324SRi:4#config snmp system_name DGS-3324SRi Stackable Switch
Command: config snmp system_name DGS-3324SRi Stackable Switch
Success.
DGS-3324SRi:4#
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
DGS-3324SRi:4#enable rmon
Command: enable rmon
Success.
DGS-3324SRi:4#
Used to configure the name for the Switch.
config snmp system_name {<sw_name>}
The config snmp system_name command configures the name
of the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring
(RMON) on the Switch.
None.
Only administrator-level users can issue this command.
51