D-Link xStack DGS-3300 User Manual page 183

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
enable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To enable SSH:
DGS-3324SRi:4#enable ssh
Command: enable ssh
Success.
DGS-3324SRi:4#
disable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To disable SSH:
DGS-3324SRi:4# disable ssh
Command: disable ssh
Success.
DGS-3324SRi:4#
config ssh authmode
Purpose
Syntax
Description
Used to enable SSH.
enable ssh
This command will enable SSH on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable SSH.
disable ssh
This command will disable SSH on the Switch.
None.
Only administrator-level users can issue this command.
Used to configure the SSH authentication mode setting.
config ssh authmode [password | publickey | hostbased]
[enable | disable]
This command will allow users to configure the SSH authentication
mode for users attempting to access the Switch.
180