D-Link xStack DGS-3300 User Manual page 276

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
create vrrp vrid
Restrictions
Example usage:
To create a VRRP entry:
DGS-3324SRi:4#create vrrp vrid 1 ipif Darren ipaddress 11.1.1.1 state
enable priority 200 advertisement_interval 1 preempt true critical_ip
10.53.13.224 critical_ip_state enable
Command: create vrrp vrid 1 ipif Darren ipaddress 11.1.1.1 state enable
priority 200 advertisement_interval 1 preempt true critical_ip 10.53.13.224
critical_ip_state enable
Success.
DGS-3324SRi:4#
config vrrp vrid
Purpose
Syntax
Description
disable the critical IP address entered above. The default is disable.
Only administrator-level users can issue this command.
To configure a VRRP router set on the Switch.
config vrrp vrid <vrid 1-255> ipif <ipif_name 12> {state [enable |
disable] | priority <int 1-254> | ipaddress <ipaddr> |
advertisement_interval <int 1-255> | preempt [true | false] |
critical_ip <ipaddr> | critical_ip_state [enable | disable]}
This command is used to configure a previously created VRRP
interface on the Switch.
273