Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config firmware
Restrictions
Example usage:
To delete a firmware from the Switch's memory:
Example usage:
To configure a firmware as the boot up runtime image firmware:
show firmware information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current firmware information on the Switch:
delete – Selecting this parameter, along with the image_id will delete
this firmware from the Switch's memory.
boot_up - Selecting this parameter, along with the image_id will set
this firmware as the default boot up runtime image firmware upon the
next reboot of the Switch.
Only administrator-level users can issue this command.
DGS-3324SRi:4#config firmware image_id 2 delete
Command: config firmware image_id 2 delete
Success.
DGS-3324SRi:4#
DGS-3324SRi:4#config firmware image_id 2 boot_up
Command: config firmware image_id 2 boot_up
Success.
DGS-3324SRi:4#
Used to display the firmware section information.
show firmware information
This command is used to display the firmware section information.
None.
None.
57
Advertisement
Table of Contents
