Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config authen application
Restrictions
Example usage:
To configure the default method list for the web interface:
DGS-3324SRi:4#config authen application http login default
Command: config authen application http login default
Success.
DGS-3324SRi:4#
show authen application
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the login and enable method list for all applications on the Switch:
DGS-3324SRi:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
---------------- ------------------
Console
Telnet
SSH
HTTP
DGS-3324SRi:4#
(console, telnet, web, ssh) login method.
login – Use this parameter to configure an application for normal login
on the user level, using a previously configured method list.
enable - Use this parameter to configure an application for upgrading a
normal user level to administrator privileges, using a previously
configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 15> – Use this parameter to configure an
application for user authentication using a previously configured
method list. Enter a alphanumeric string of up to 15 characters to define
a previously configured method list.
Only administrator-level users can issue this command.
Used to display authentication methods for the various applications
on the Switch.
show authen application
This command will display all of the authentication method lists (login,
enable administrator privileges) for switch configuration applications
(console, telnet, SSH, web) currently configured on the Switch.
None.
None.
default
default
Trinity
default
default
------------------------
default
default
default
167
Advertisement
Table of Contents
