xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#disable rip
Command: disable rip
Success.
DGS-3324SRi:4#
show rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display RIP configuration:
DGS-3324SRi:4#show rip
Command: show rip
RIP Global State : Disabled
Update Interval : 30 sec.
Timeout Interval : 180 sec.
Garbage Collect Interval : 120 sec.
RIP Interface Settings
Interface
-------------
System
Total Entries : 1
DGS-3324SRi:4#
Used to display the RIP configuration and statistics for the
Switch.
show rip {ipif <ipif_name 12>}
This command will display the RIP configuration and statistics for
a given IP interface or for all IP interfaces.
ipif <ipif_name 12> − The name of the IP interface for which to
display the RIP configuration and settings. If this parameter is not
specified, the show rip command will display the global RIP
configuration for the Switch.
None.
IP Address
TX Mode
------------------
----------
10.41.44.33/8
Disabled
RX Mode
Authen-
tication
-------------
----------
Disabled
Disabled Disabled
300
State
-----