D-Link xStack DGS-3300 User Manual page 198

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
create 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To create an 802.1x user:
DGS-3324SRi:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3324SRi:4#
show 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view 802.1X users currently configured on the Switch:
DGS-3324SRi:4#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username
--------------
Darren
Total entries: 1
DGS-3324SRi:4#
Used to create a new 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1x
users.
<username 15> − A username of up to 15 alphanumeric
characters in length.
Only administrator-level users can issue this command.
Used to display the 802.1x user accounts on the Switch.
show 802.1x user
The show 802.1x user command is used to display the 802.1x
Port-based or MAC-based Network Access control local users
currently configured on the Switch.
None.
None.
Password
--------------
Trinity
195