D-Link xStack DGS-3300 User Manual page 77

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#delete syslog host 4
Command: delete syslog host 4
Success.
DGS-3324SRi:4#
show syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show syslog host information:
DGS-3324SRi:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity
-------
1
2
3
Total Entries : 3
DGS-3324SRi:4#
Used to display the syslog hosts currently configured on the
Switch.
show syslog host {<index 1-4>}
The show syslog host command is used to display the syslog
hosts that are currently configured on the Switch.
<index 1-4> − Specifies that the command will be applied to an
index of hosts. There are four available indexes, numbered 1
through 4.
None.
--------------- --------------
10.1.1.2 All
10.40.2.3 All
10.21.13.1 All
Facility UDP port
-------- -------- --------
Local0 514 Disabled
Local0 514 Disabled
Local0 514 Disabled
74
Status