D-Link xStack DGS-3300 User Manual page 290

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#config route redistribute dst ospf src rip type_1 metric 2
Command: config route redistribute dst ospf src rip type_1 metric 2
Success.
DGS-3324SRi:4#
delete route redistribute
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To delete route redistribution settings:
show route redistribute
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display route redistributions:
Used to delete an existing route redistribute configuration on the
Switch.
delete route redistribute {dst [rip | ospf] src [rip | static | local
| ospf]}
This command will delete the route redistribution settings on this
switch.
dst [rip | ospf] − Allows the selection of the protocol on the
destination device. The user may choose between RIP and OSPF.
src [rip | static | local | ospf] − Allows the selection of the protocol
on the source device. The user may choose between RIP, static,
local or OSPF.
Only administrator-level users can issue this command.
DGS-3324SRi:4#delete route redistribute dst rip src ospf
Command: delete route redistribute dst rip src ospf
Success.
DGS-3324SRi:4#
Used to display the route redistribution on the Switch.
show route redistribute {dst [rip | ospf] | src [rip | static | local
| ospf]}
Displays the current route redistribution settings on the Switch.
src [rip | static | local | ospf] − Allows the selection of the routing
protocol on the source device. The user may choose between RIP,
static, local or OSPF.
dst [rip | ospf] − Allows the selection of the routing protocol on the
destination device. The user may choose between RIP and OSPF.
None.
287