Configure Ip And Vlan Settings - NETGEAR ProSafe WC7520 Reference Manual

Figure 28.
2. Configure the settings as explained in the following table:
Table 9. Time settings
Setting
Time Zone
Current Time
NTP Client
Use Custom NTP Server Select this check box if you want to use an alternate NTP server. By default, the
Hostname/IP Address
3. Click Apply to save your settings.

Configure IP and VLAN Settings

The IP Settings screen lets you configure the management IP address settings of the
wireless controller.

To configure IP/VLAN settings:
1. Select Configuration > System > IP/VLAN. The IP Settings screen displays:
ProSafe 20-AP Wireless Controller WC7520
Description
From the drop-down list, select the local time zone for your country or region.
This is a nonconfigurable field that displays the current time at your location.
Select the Enable radio button to use a Network Time Protocol (NTP) server to
synchronize the clock of the wireless controller and managed access points.
Select the Disable radio button if you do not want to use an NTP server.
NETGEAR NTP server is used.
Enter the host name or IP address of the NTP server, if you are using a custom
NTP server.
Configuring Network Settings
60